Blog

ENRX, Roctool collaborate to advance mold electrification | CompositesWorld

Advancing through a third of the program in just three months, Archer continues to make rapid progress toward planned full wing-borne transition flight in Phase 2.

The U.S. Air Force conducted on-base and cross-country mission and performance evaluations of Beta’s composites-intensive CTOL aircraft, hitting key milestones. Recycled Plastic Injection Molding

ENRX, Roctool collaborate to advance mold electrification | CompositesWorld

Horizontal and vertical tail, aileron, and rudder and elevator will be developed and manufactured for the lift + cruise aircraft, scheduled to enter service in 2026.

In addition to its composite aircraft, Overair will support infrastructure, aircraft operations and training to ensure a comprehensive and sustainable AAM ecosystem.

This initial project under the Space Act Agreement is focused on studying and developing high-performance battery cells, as well as performing safety testing, to achieve purpose-built solutions for electric aircraft.  

AeroZero TPS, applicable for metals and composites, will protect critical battery housing and parts in the Lilium Jet eVTOL aircraft from burn through and risk of thermal runaway.

Through a strategic partnership, the companies introduce the FiberScanner3D module, dedicated to bringing more rapid, reliable and robust fiber structure characterization methods to lab settings.

The new alliance will broaden National Composites’ capabilities in SMC and BMC and tooling, while providing customers with comprehensive solutions, from initial design to final delivery.

A new ASTM-standardized test method established in 2022 assesses the compression-loaded damage tolerance of sandwich composites.  

Composites automation specialist increases access to next-gen technologies, including novel AFP systems and unique 3D parts using adaptive molds.

Combined LSAM and five-axis CNC milling capabilities will optimize D-Composites’ production services, flexibility and cut time and cost for composite tooling manufacture.

Evaluation of CFRTP m-pipe through Element’s U.K. facility aims to qualify the system for new operating environments.

Delivered and implemented at Toray Advanced Composites, the setup seeks to eliminate defects during hot press forming thermoplastic tapes.

ReCarbon will focus on providing a high-quality recycled carbon fiber-based product range, using Fibertech’s prepreg expertise.

Use of Envalior’s fiberglass-reinforced ForTii ACE MX53 and collaboration with its CAE department helped Koki re-adjust product design, simulation and tooling to get the best out of material performance.

Lifecycle assessment, starting at Toray’s Nijverdal site and then broadening to U.S. locations, will provide reliable emissions data to customers purchasing the range of thermoplastic composite materials.

JEC World 2024: Freudenberg Performance Materials displays innovative surface veils, flow media and spacer solutions to meet the evolving requirements of FRP parts.

Space-grade Strato panels line was incorporated into the small spacecraft platform’s solar array substrate/backup structure assemblies design, reducing costs, lead time and meeting positional tolerance without fixtures.

An independent entity, Supernova will enhance materials development and hardware industrialization for the viscous lithography manufacturing process, which can take fillers or fiber reinforcement for elevated product development.

Delivered and implemented at Toray Advanced Composites, the setup seeks to eliminate defects during hot press forming thermoplastic tapes.

HyFiVE project came to a close in 2023, providing new insight for adhesive-free joining of metal and fiber-reinforced technologies for maritime construction.

JEC World 2024: Compcut is presenting its advanced composites saw (ACS) and precision composite router (PCR), in addition to inviting attendees to bring their own materials for demonstration purposes.

GA-ASI demonstrates a path forward for the use of additive technologies for tooling, flight-qualified parts.  

JEC World 2024: Roth Composite Machinery is co-exhibiting with partner mefex GmbH to present new developments to its µRoWin software for automated filament winding.

CW explores key composite developments that have shaped how we see and think about the industry today.

Knowing the fundamentals for reading drawings — including master ply tables, ply definition diagrams and more — lays a foundation for proper composite design evaluation.

As battery electric and fuel cell electric vehicles continue to supplant internal combustion engine vehicles, composite materials are quickly finding adoption to offset a variety of challenges, particularly for battery enclosure and fuel cell development.  

Performing regular maintenance of the layup tool for successful sealing and release is required to reduce the risk of part adherence.

Increasingly, prototype and production-ready smart devices featuring thermoplastic composite cases and other components provide lightweight, optimized sustainable alternatives to metal.

The composite pressure vessel market is fast-growing and now dominated by demand for hydrogen storage.

The burgeoning advanced air mobility (AAM) market promises to introduce a new mode of transport for urban and intercity travelers — particularly those who wish to bypass the traffic congestion endemic to the world’s largest cities. The electric vertical take-off and landing (eVTOL) aircraft serving this market, because they depend on battery-powered propulsion, also depend on high-strength, high-performance composite structures produced at volumes heretofore unseen in the aerospace composites industry. This CW Tech Days will feature subject matter experts exploring the materials, tooling and manufacturing challenges of ramping up composites fabrication operations to efficiently meet the demands of a challenging and promising new marketplace.

Manufacturers often struggle with production anomalies that can be traced back to material deviations. These can cause fluctuations in material flow, cooling, and cure according to environmental influences and/or batch-to-batch variations. Today’s competitive environment demands cost-efficient, error-free production using automated production and stable processes. As industries advance new bio-based, faster reacting and increased recycled content materials and faster processes, how can manufacturers quickly establish and maintain quality control? In-mold dielectric sensors paired with data analytics technology enable manufacturers to: Determine glass transition temperature in real time Monitor material deviations such as resin mix ratio, aging, and batch-to-batch variations throughout the process Predict the influence of deviations or material defects during the process See the progression of curing and demold the part when the desired degree of cure, Tg or crystallinity is achieved Document resin mix ratios using snap-cure resins for qualification and certification of RTM parts Successful case histories with real parts illustrate how sensXPERT sensors, machine learning, and material models monitor, predict, and optimize production to compensate for deviations. This Digital Mold technology has enabled manufacturers to reduce scrap by up to 50% and generated energy savings of up to 23%. Agenda: Dealing with the challenge of material deviations and production anomalies How dielectric sensors work with different composite resins, fibers and processes What is required for installation Case histories of in-mold dielectric sensors and data analytics used to monitor resin mixing ratios and predict potential material deviations How this Digital Mold technology has enabled manufacturers to optimize production, and improve quality and reliability

SolvaLite is a family of new fast cure epoxy systems that — combined with Solvay's proprietary Double Diaphragm Forming technology — allows short cycle times and reproducibility. Agenda:  Application Development Center and capabilities Solutions for high-rate manufacturing for automotive Application examples: battery enclosures and body panels

OEMs around the world are looking for smarter materials to forward-think their products by combining high mechanical performance with lightweight design and long-lasting durability. In this webinar, composite experts from Exel Composites explain the benefits of a unique continuous manufacturing process for composites profiles and tubes called pull-winding. Pull-winding makes it possible to manufacture strong, lightweight and extremely thin-walled composite tubes and profiles that meet both demanding mechanical specifications and aesthetic needs. The possibilities for customizing the profile’s features are almost limitless — and because pull-winding is a continuous process, it is well suited for high volume production with consistent quality. Join the webinar to learn why you should consider pull-wound composites for your product. Agenda: Introducing pull-winding, and how it compares to other composite manufacturing technologies like filament winding or pultrusion What are the benefits of pull-winding and how can it achieve thin-walled profiles? Practical examples of product challenges solved by pull-winding

Composite systems consist of two sub-constituents: woven fibers as the reinforcement element and resin as the matrix. The most commonly used fibers are glass and carbon, which can be processed in plane or satin structures to form woven fabrics. Carbon fibers, in particular, are known for their high strength/weight properties. Thermoset resins, such as epoxies and polyurethanes, are used in more demanding applications due to their high physical-mechanical properties. However, composites manufacturers still face the challenge of designing the right cure cycles and repairing out-of-shelf-life parts. To address these issues, Alpha Technologies proposes using the encapsulated sample rheometer (premier ESR) to determine the viscoelastic properties of thermosets. Premier ESR generates repeatable and reproducible analytical data and can measure a broad range of viscosity values, making it ideal for resins such as low viscous uncured prepreg or neat resins as well as highly viscous cured prepregs. During testing, before cure, cure and after cure properties can be detected without removing the material from the test chamber. Moreover, ESR can run a broad range of tests, from isothermal and non-isothermal cures to advanced techniques such as large amplitude oscillatory shear tests. During this webinar, Alpha Technologies will be presenting some of the selected studies that were completed on epoxy prepreg systems utilizing ESR and how it solves many issues in a fast and effective way. It will highlight the advantages of this technique that were proven with the work of several researchers. Moreover, Alpha Technologies will display part of these interesting findings using the correlations between the viscoelastic properties such as G’ and mechanical properties such as short beam shear strength (SBS).

Surface preparation is a critical step in composite structure bonding and plays a major role in determining the final bonding performance. Solvay has developed FusePly, a breakthrough technology that offers the potential to build reliable and robust bonded composite parts through the creation of covalently-bonded structures at bondline interface. FusePly technology meets the manufacturing challenges faced by aircraft builders and industrial bonding users looking for improved performance, buildrates and lightweighting. In this webinar, you will discover FusePly's key benefits as well as processing and data. Agenda: Surface preparation challenges for composite bonding FusePly technology overview Properties and performance data

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) invites you to the 17th World Pultrusion Conference which takes place on 29 February – 1 March 2024 in Hamburg, Germany. Visit the most important event in Europe in the market for pultruded fiber reinforced materials  This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Finland, Belgium, Germany, France, Spain, The Netherlands, Turkey, UK, USA, Canada and others will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda. This World Pultrusion Conference takes place again in the week before the JEC World Composites Show (5-7 March 2024, Paris). The presentation language will be English. Please finde here the full program and booking opportunities. We appreciate very much welcoming you in Hamburg! Inquiries should be requested by email: info@pultruders.com

The Program of this Summit consists of a range of 12 high-level lectures by 14 invited speakers only. Topics are composite related innovations in Automotive & Transport, Space & Aerospace, Advanced Materials, and Process Engineering, as well as Challenging Applications in other markets like Architecture, Construction, Sports, Energy, Marine & more.

JEC World in Paris is the only trade show that unites the global composite industry: an indication of the industry’s commitment to an international platform where users can find a full spectrum of processes, new materials, and composite solutions.

Charting the Skies of Tomorrow: The Sustainable Aviation Revolution Welcome to a new era of air travel where innovation meets sustainability. Electric, hybrid-electric and hydrogen-powered aircraft represent a promising path to reach climate neutrality goals, with the aviation industry and governments jointly pushing boundaries to bring disruptive aircraft into service by 2035. From cutting-edge technologies to revamped regulations and greener airports, the pursuit of sustainable aviation requires unparalleled collaboration throughout the whole aviation value chain and ecosystem. Join us at the Clean Aviation Annual Forum from 5 until 6 March 2024, as we navigate towards cleaner skies together.

Composites 2024 is an international conference that focuses on advanced technology and development of composite materials. It brings together participants from academia and industry who share an interest in Composite Materials. It is a unique opportunity for composite specialists and newcomers alike and has long been a venue where researchers and industrialists network and share with colleagues from around the world and establish long term partnership. The conference includes plenary talks, keynote and oral presentations as well as posters sessions, an exhibit area for industry partners and sponsors, and an entertaining social program.

The European polyamide market is going through unprecedented times as it grapples with rising energy and feedstock prices, as well as declining consumption levels with lower demand from almost all application segments (including automotive, construction, fibres and E&E). Coupled with the growing emphasis on sustainability, recycling and the circular economy, this is a challenging period for the polyamide market in Europe. Is 2024 the year that the polyamide segment looks to emerge from the crisis tunnel? The industry needs to adapt to the new market reality, to innovate and invest in new technologies and processes to meet the new market demands and requirements with regards to economic sustainability and a circular economy. The Wood Mackenzie European Polyamide Conference takes place at the Kap Europa Congress Center in Frankfurt, Germany on 13-14 March 2024, combining integrated analysis across the polyamide value chain with sessions focused on feedstocks, polymers, and key application markets, deep dives into emerging trends and technologies. Themes for 2024 include: Is there any hope for the European polyamide industry? Is the polyamide profitability gone? What can we expect in the coming years? Will China's importation threat permanently change the European polyamide market? What are the future polyamide price trends and forecasts? Who will be the winners and losers of the current situation Is the circular economy a threat or an opportunity for the polyamide industry?

Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.

Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.   

Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.

CW Top Shops honoree Sargo Oy shares its successes in upgrading operations from hand layup to infusion, employing low-waste manufacturing practices, research in large-format 3D printing for mold production and more.

CompositesWorld discusses recent changes, upcoming events and strategies for the upcoming year. 

Projects use Duplicor prepreg panels with highest Euroclass B fire performance without fire retardants for reduced weight, CO2 footprint in sustainable yet affordable roofs, high-rise façades and modular housing.

Automated fiber placement develops into more compact, flexible, modular and digitized systems with multi-material and process capabilities.

Switching from prepreg to RTM led to significant time and cost savings for the manufacture of fiberglass struts and complex carbon fiber composite foils that power ORPC’s RivGen systems.

Sara Black’s 2015 report on the development of snap-cure epoxies for automotive manufacturing still resonates today. 

Projects use Duplicor prepreg panels with highest Euroclass B fire performance without fire retardants for reduced weight, CO2 footprint in sustainable yet affordable roofs, high-rise façades and modular housing.

To incorporate more environmentally conscious practices into its manufacturing processes, VSC is working with Carbon Conversions to reclaim, recycle and reuse its carbon fiber materials.

As the marine market corrects after the COVID-19 upswing, the emphasis is on decarbonization and sustainability, automation and new forms of mobility offering opportunity for composites.

Novel material to combine Ohoskin’s leather alternative made from orange and cactus byproducts with ReCarbon’s recycled carbon fiber.

The three-year strategic collaboration will help boost the company’s growth, reinforce its commitments to become carbon neutral by 2040 and innovate more circular chemicals and materials.

Oak Ridge National Laboratory's Sustainable Manufacturing Technologies Group helps industrial partners tackle the sustainability challenges presented by fiber-reinforced composite materials.

Closed mold processes offer many advantages over open molding. This knowledge center details the basics of closed mold methods and the products and tools essential to producing a part correctly.

This CW Tech Days event will explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

In the Automated Composites Knowledge Center, CGTech brings you vital information about all things automated composites.

Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

During CW Tech Days: Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.

CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Plastics and composites manufacturers will benefit from Roctool’s heat and cooling induction for molding processes, with increased technical service support and capability demonstrations on a global scale.

Linen shoe insoles produced via Roctool’s molding technology. Photo Credit, all images: Roctool

ENRX (Skien, Norway), developing standalone equipment and integrated systems for induction heating, wireless inductive charging and contactless power supply, and heat and cool molding technologies company Roctool (Le Bourget du Lac, France), have signed a long-term agreement to offer plastics and composites manufactures a sustainable molding solution via a “mold electrification” program. 

Roctool’s expertise includes the design and thermal simulation of heat and cool induction integration for plastic injection molding and compression molding of composites. According to the company, its molding technology reduces cycle times due to the efficiency of induction heating, while also facilitating a significant decrease in energy consumption. This resonates with Roctool’s customers, who are increasingly focused on reducing their carbon footprint by integrating recycled materials or natural fibers into their products. Roctool is said to be especially useful for the processing of thermoplastics, as it enables optimized cycle times and high-quality surface finish directly on the molded part. More than 500 Roctool induction systems have been installed across various sectors, from automotive, electronics, cosmetics and aerospace to energy sports and leisure.

ENRX, with more than 1,200 inducting heating patents, has been supplying key components to Roctool for its molding technology for more than 10 years. Induction heating is commonly used by global automotive brands, major electrotechnical companies, large steel tube and pipe manufacturers and in many other industrial segments. One growing segment is heat treatment related to components for renewable energy generation and storage products. Replacing gas, water or oil heating with induction heating also reduces CO2 emissions.

Textured replication directly from the Roctool mold using recycled carbon fiber.

The recent collaboration with ENRX provides support to Roctool’s mold electrification program, i.e., more sustainable production methods compared to conventional molding practices that may lack Roctool’s induction technology. Plastic parts manufacturers and composite parts manufacturer can now benefit from such offerings, Roctool says.

Moreover, ENRX and Roctool’s alliance will increase technical services and on-site support for Roctool technology owned by existing and new users, more demonstration and trial capabilities on a global scale, extended technical expertise for new projects related to heat and cool performance and energy consumption, and an improved presence in North America, China and India.

“Year after year, Roctool has been growing its number of users thanks to its molding technology performance,” ENRX CEO Bjorn Eldar Petersen says. “We are now excited to fully support this technology in order to take it to the next level as we see that the plastics and composites market need efficient molding solutions to reach their sustainability goals. Mold electrification will become a new standard for many manufacturers.”

Shocker Composites and R&M International are developing a supply chain for recycled CF with zero knockdown vs. virgin fiber, lower cost and, eventually, lengths delivering structural properties close to continuous fiber.

There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

Suppliers of thermoplastics and carbon fiber chime in regarding PEEK vs. PEKK, and now PAEK, as well as in-situ consolidation — the supply chain for thermoplastic tape composites continues to evolve.

ENRX, Roctool collaborate to advance mold electrification | CompositesWorld

Gas Assisted Mould CompositesWorld is the source for reliable news and information on what’s happening in fiber-reinforced composites manufacturing. Learn More